Mechanical oil
Mechanical oil
This product is made from petroleum distillate oil , solvent dewaxing , solvent refining , hydrorefining , clay enrichment.
All products are suitable for lubricating oil without specia requirements of the mechanical parts of the lubrication , but also other lubricants can be modulated.
Quality index:
| Items | Quality Index | Test method | |||||||||
| Variety | L-AN | — | |||||||||
| Viscosity grade (According to GB3141) | 5 | 7 | 10 | 15 | 22 | 32 | 46 | 68 | 100 | 150 | — |
| Kinematic viscosity (40℃), mm2/s |
4.14 -5.06 |
6.12 -7.48 |
9.00 -11.00 |
13.5 -16.5 |
19.8 -24.2 |
28.8 -35.2 |
41.4 -50.6 |
61.2 -74.8 |
90.0 -110 |
135 -165 |
GB/T265 |
| Pour point , ℃ not higher than | -5 | GB/T3535 | |||||||||
| Water-soluble acids or bases | no | GB/T259 | |||||||||
| Neutral value | report | GB/T4945 | |||||||||
|
Mechanical impurities , % no greater than |
no | 0.005 | 0.007 | GB/T511 | |||||||
|
Moisture, % no greater than |
trace | GB/T260 | |||||||||
|
Flash point (opening),℃ not lower than |
80 | 110 | 130 | GB/T3536 | |||||||
|
Corrosion test ( Copper pieces, 100 ℃、3h ),grade no greater than |
1 | GB/T5096 | |||||||||
| Chroma, number | 2 | 2.5 | report | GB/T6540 | |||||||
Second, Marking, packaging, transportation, storage and transportation
Marking, packaging, transportation, storage and delivery acceptance by SH0164.
Third, sampling
Sampling according to GB/T4756 for 2L for inspection and retention.
-
HN-69-1 Emulsification Cutting fluid -
HN-M9 Machining Center Emulsification Cutting fliud -
HN-R1 Grinding & Antirust Emulsification Cutting fliud -
HN-R1A Grinding & Antirust Emulsification Cutting fliud -
HN-R1B Line Cutting Emulsification fliud
-
HN-R1C Copper Wire Drawing fluid
